DIY Vintage inspired mushroom ornaments

Today I wanted to share a little DIY for a vintage inspired ornament. Not only do these make cute ornaments, but they are great tied to the top of gifts too. I actually have a folder on my computer for vintage Christmas ornaments I want to try and recreate, so I am happy to get one done in plenty of time for Christmas!

These guys are really customizable, so wether you want to paint on eyes, eyebrows, and a smile, use wiggly glue on eyes or cut shapes out of felt-anything goes! Here are your basic supplies:
-Styrofoam balls: I opted for the firm balls that have a smooth surface
-Paper Mache balls: These were slightly tricky because they had a rubbery like ball hidden inside under the paper mache, just look for balls made of cardboard exclusively to make cutting easiest. These sorts of balls still work of course, they just take a little more care to cut.
-Glue: You’ll need thick tacky glue and a hot glue gun
-Berry Stems- these are for the noses, but you could always skip noses, cut them from felt, or paint one on instead.
-Brushes
-Pom-poms: these act as a buffer between the mushroom cap and body. If you glue the cap directly onto the body it ends up covering part of the face and didn’t quite match the look of the vintage ornaments.
-Paint-You’ll need red, optional colors are black and white (for face painting)
-Wire- This is to create a hanger on top, but you can also glue a plastic hanger in place like I did on a couple of the ornaments instead.
-Red Glitter
-White Flocking Powder
1. Use scissors to cut your ball in half. Then trim it until its a bit smaller and looks good with your body styrofoam ball.
2. Paint one side of the mushroom top red and immediately sprinkle with red glitter, allow to dry and then do the same to the other side. Make sure the very edge is covered as well. Set aside to dry.
3.. Next your are gonna coat the styrofoam ball with the thick tacky glue. I like the poke a wooden craft stick into the end of the ball to make it easier to hold. Then sprinkle the whole thing with white flocking powder (follow instructions for powder about well ventilated area) Let this dry completely.
4. Use hot glue to attach pom pom to top of body. Twist wire into a little hook and insert end through top of mushroom, I use a little hot glue to secure the end in place. Then glue mushroom cap onto the pom pom.
5. To add flocked dots, apply little dots of tacky glue to the top and sprinkle on the flocking powder. Then you just blow away what doesn’t stick and you’ll be amazed at how nice and clean your flocked dots are. Or you can cut some from felt and glue them on.
6. Lastly once it’s all dry you can add your face. Cut the nose stem short and push it into the ball. Paint on eyes, glue on wiggly eyes etc. and voila!
I’d love to see them if you make any!

Paper Pumpkin DIY

Today I wanted to share a DIY with you that was inspired by a vintage die cut cardboard jack o’ lantern from 1940, that I loved, but it sold for $67. So I decided to sit down and try and recreate my own. As you can see my jacks are two different colors. I had the files printed two different days at Staples, with over a month of time in between, so it’s kind of funny how different the oranges are.
Please feel free to make a pumpkin or two for your holiday decorating. Just please remember this DIY is for your own personal use and may not be sold, or changed in any way.
pp1
1. First print out the jack o’ lantern there will be two pages.
2. I used my Xyron XM1255 to create a permanent adhesive on the backs, you can also use spray glue. Then attach your pumpkin sheets to card stock.
3. Use an x-acto knife to cut your pumpkin out. For the side pieces leave them as long as possible for now, it makes it easier to assemble.


4. Next attach the face pieces behind, my favorite kind of glue to use on paper projects is 3m Scotch Quick-dry Tacky Adhesive it really dries quick but gives you a lot more hold then something like a glue stick.




5. Once dry you are going to feed your side pieces through. The longest part sits against the bottom, and then you just carefully pull each long strip through the cut holes.
6. Next one by one you will trim the strip and glue it down to the pumpkin. Hold each strip end down until it dries (it will be quick with the scotch glue)

You can punch little holes near the top and add a string or wire handle, fill it with some tricks & treats and you are good to go! If you make one, please post a link-I’d love to see!

DIY: valentines for friends

DIY vintage valentines for friends
vintage valentines for friends DIY
vintage valentines for friends DIY
I thought it would be fun this year to give some of my lady friends some special little boxes of chocolate for Valentines day. Of course I had to dress them up a bit, and I thought I’d share the real easy DIY with you in case you’d like to make some for co-workers, friends, or anyone you’d like to give a little something more then a card to on Valentine’s Day.
supplies
Supplies:
Russell Stover 2oz I purchased a bunch of these little 2oz boxes of chocolate, these are the kind with just 4 pieces inside. Mine arrived in red boxes for Valentines. If you are really ambitious you could make your own chocolates and find little boxes to put them in.
-cardboard circles for the bases: I free hand cut mine from cereal boxes. These do not need to be perfect because your going to cover them up, you just want them to be about the size of your boxes.
-glue: I used a hot glue gun
-decorations: flattened cupcake wrappers, crepe paper streamer (I ruffled some of mine using a ruffler foot on my sewing machine, but you can also gather and glue down by hand) garland (I found red, and red and white garland after xmas on clearance and in thrift shops)
-vintage valentine cut out: I’ve made two pages page one and page two I had mine printed on card stock.
All you need to do for assembly is build up layers on your cardboard circle with glue. I changed each one around a bit sometimes using the garland first, some times a cupcake wrapper. Then I added a few little items to some like buttons, or little heart cupcake picks. Then just write a little note on the bottom of the box of chocolate and you are ready to give them out!
vintage valentine DIYvintage valentine DIY

**Personal use means non-commercial use of the valentines including copies and print outs for yourself, your personal crafts/scrapbooking and to give to friends. The valentines may not be used in any way whatsoever in which you charge money, collect fees, or receive any form of remuneration. The valentines may not be used in advertising, and they may not be resold.***